Payment & Shipping Terms:
|Material:||Incoloy020 Alloy20 No8020 2.4660 Alloy Round Bar Pipe Plate Wire Coil||Type:||Alloy Bar Tube Sheet Wire|
|Grade:||Nickel Base Alloy||Shape:||Sheet/strip/pipe/wrie/bar/ect|
|Packages:||In Bundles With Waterproof Material||Shipping Port:||Shanghai|
nickel steel alloy,
corrosion resistant steel alloys,
high temperature alloys
incoloy020 Alloy20 No8020 2.4660 alloy round bar pipe plate wire coil Incoloy 800 800H 800HT 901 925 926
Incoloy is a nickel ferrochrome alloy designed for oxidation and carbonation at elevated temperatures.Incoloy alloy has many kinds: common such as Incoloy800, Incoloy800H, Incoloy800HT, Incoloy825, Incoloy840, Incoloy901, Incoloy925, Incoloy20, Incoloy330, Incoloy 25-6mo, etc.The alloy contains a small amount of the metallic elements molybdenum and copper.In reductive acid and oxidizing acid, it has good corrosion resistance, as well as good resistance to stress corrosion cracking, pitting and crevice corrosion.It has excellent corrosion resistance to sulfuric acid and phosphoric acid.The alloy has good cold and hot working properties and is easy to be formed and welded.The main products of this alloy are rods, tubes, plates, strips, wires and forgings, etc. It is mainly used in the chemical, petrochemical, nuclear and rare metal refining industries.
The Cr content in the Incoloy 20 nickel-based alloy is usually from 19.0 to 21.0%, and the nickel content is from 32.0 to 38.0%. It is a nickel-based alloy containing molybdenum and copper with excellent thermal and cold workability. Corrosion-resistant alloy with many excellent properties, excellent resistance to oxidizing and moderately reducing corrosion, excellent resistance to stress corrosion cracking and good resistance to local corrosion. Satisfactory corrosion resistance in many chemical process media characteristic.
Common trade names: Incoloy 20 2.4660 corresponding grade: National standard: NS1403, NS143, 20NB, 0cr20ni35Mo3Cu3Nb, American standard: incoloy020, Alloy20, No8020, German standard: 2.4660, nicr20cumo, Nicrofer 3620NB. is a full austenitic high corrosion resistant alloy that resists water corrosion and erosion at elevated temperatures. This alloy has excellent resistance to general corrosion, pitting, crevice corrosion, intergranular corrosion and stress corrosion cracking. Alloy 22 has found many applications in chemical/petrochemical processing, pollution control (flue gas desulfurization), power, marine, pulp and paper processing, and waste treatment industries.
Available product forms:
Pipes, pipes, fittings, flanges, sheets, strips, plates, round bars, flat bars, fasteners, forgings, hexagons and wires
Complete specifications, stock in stock
Strip, sheet (thick plate, medium plate, sheet, steel plate), bar (black bar, light bar, grinding bar, round bar, square bar, steel bar), pipe (capillary, seamless pipe, steel pipe), Forgings (flanges, elbows, bolts, nuts, tees), welding consumables (welding rods, welding wire, welded pipes), wire and other materials.
Chemical Composition Of Incoloy 20
|Product Name||alloy round bar pipe plate wire coil|
|Production Process||Cold Drawn,Cold Rolled,Hot Rolled,Bright Anneal etc|
|Size||5.5-110mm(Hot rolled), 2-50mm(Cold drawn),110-500mm(Forged)|
|Standard||ASTM EN DIN GB ISO JIS|
|Pickling,Bright; No.1,2B,No.4,BA,8K Satin,Brush,Hairline,Mirror,Polished
180 grits,320 grits,400 grits,600 grits,800 grits polished
|Application||Constructions feilds and ship building industries Petroleum,Chemical industries,War and electiciy industries. Food processing and medical industries. Boiler heat cxchangers,Machinery and hardware feilds.|
Incoloy 20 2.4660 Corrosion resistance: Good corrosion resistance in concentrated sulfuric acid below 50 degrees, more than 50 degrees above. Shanghai Jiayu is not recommended. It is not an ideal material in wet process phosphoric acid and HCl, resistant to intergranular corrosion and points. Poor eclipse.
Incoloy 20 2.4660 physical properties: density 8.1g / cm3, melting point: 1350 ~ 1370 ° C, specific heat capacity: 500J / kg. K, thermal conductivity: 13.5. W (m. K), elastic modulus: 200 MPa.
Incoloy 20 2.4660 Machining and welding: The thermoforming temperature of the alloy is 970~1065 degrees. It is not suitable for the forming operation under the sensitive temperature of 650 °C. The cold forming of this alloy is similar to chrome-nickel stainless steel. The heat treatment is preferably stabilized at 940 degrees, and the intermediate annealing temperature is at a solid solution softening annealing treatment higher than 1050 degrees, and can be welded by a usual welding method.
Alloy 22 is nickel based and typically contains 22% chromium, 14% molybdenum and 3% tungsten. Iron is usually limited to less than 3%. The high chromium content of the alloy gives it a good wet corrosion resistance to oxidizing media such as nitric acid, iron and copper salts. The content of molybdenum and tungsten makes the alloy resistant to moisture reducing media such as sulfuric acid and hydrochloric acid. Alloy 22 exhibits excellent seawater corrosion resistance under stagnant and flow conditions.
At high temperatures, the high chromium content of Inconel 22 contributes to its resistance to oxidation, carburization and vulcanization. Because of its nickel-based nature, Alloy 22 resists the high temperature attack of halides such as chlorides and fluorides. With these properties, the alloy is widely used to protect steel pipes and other components in coal-fired and waste-fired boilers.
It is widely used in the chemical processing industry, hot sea water and hydrometallurgy. Mainly used for heat exchangers, pipes, valves, pumps, etc. in the treatment of hot H2SO4, chloride-containing solutions, Na2SO3 and other environments.
Bar, wire and forging blanks: US material testing standard B 462 (bar, bar and forging blanks), American material testing standard B 564 and American Society of Mechanical Engineers SB 564 (forgings), American material testing standard B 574 and the United States Mechanical Engineers Association SB 574 (bar, bar and wire), American Society of Mechanical Engineers Code Case 2226, American Society of Mechanical Engineers Specification Case N-621, International Organization for Standardization 9723, International Organization for Standardization 9724, International Standard 17752 (Bar and Bar), international standard 17753 (wire), international standard 17754 (forging)
Sheets, Sheets and Strips: - American Material Testing Standard B575; American Material Testing Standard B 906 and American Society of Mechanical Engineers SB 575 American Society of Mechanical Engineers SB 906, American Society of Mechanical Engineers Standard Case 2226, American Society of Mechanical Engineers Specification Case N- 621, International Organization for Standardization 6208, German Industrial Standard 17750
Pipes and tubes: - American material testing standard B619; American material testing standard B 775 and American Society of Mechanical Engineers SB 619 American Society of Mechanical Engineers SB 775 (welded pipe), American material testing standard b622; American material testing standard B 829 and American mechanical engineer Learn SB 622 American Society for Testing Materials SB 829 (Seamless Steel Tube), American Society for Testing Materials b626; American Material Testing Standard B 751 and American Society of Mechanical Engineers SB 626 American Society of Mechanical Engineers SB 751 (welded pipe), American Society of Mechanical Engineers specification case 2226, American Society of Mechanical Engineers specification case N-621, International Organization for Standardization 6207, German Industrial Standard 17751.
Contact Person: Haosteel