Inconel 601 Alloy 601 UNS N06601 / W.Nr.2.4851 Nickel Alloy Rod/Bar ASTM
Product Description
Inconel 601 has good high temperature strength, and retains its ductility after long service exposure, and good hot corrosion resistance under oxidizing conditions.Like Inconel 600, Inconel 601 has resistance to various forms of corrosion at high temperature and oxidization. However Inconel 601 has an addition of aluminum which give it high mechanical properties even in extremely hot environments. Alloy 601 is used for industrial furnaces; heat-treating equipment such as baskets, muffles, and retorts; petrochemical and other process equipment; and gas-turbine components. Inconel 601 is used for industrial furnaces, radiant tubes, themocouple tubes, heat treatment equipments, baskets, petrochemical process equipments and aircraft components.
Standard:
| Product | ASTM |
| Alloy Bar, Rod | B408 , B581 |
| Alloy Thick Plate, Thin Sheet, Coil Strip | A240 , A 480 , B409 , B582 , B906 |
| Alloy Seamless Tube and Pipe Fittings | B407, B622 , B829 |
| Alloy Welded Normal Bore Pipe ANSI | B514 , B619 , B775 |
| Alloy Welded Pipe | B515 , B626 , B751 |
| Alloy Welded Pipe Fittings | B366 |
| Alloy Forged or rolled pipe flange and forged | B462 , B 564 |
| Alloy Forged or rolled billet | B472 |
Inconel 601Specifications
| Grade | UNS | W.Nr |
| Inconel 601 | N06601 | 2.4851 |
Inconel 601Chemical composition
| Grade | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
| 601 | Min | 58 | 21 | Bal. | 1.0 | ||||||
| Max | 63 | 25 | 0.1 | 1.5 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
Inconel 601Mechanical properties:(Minimum value at 20℃)
|
Tensile Strength σb/MPa |
Yield Strength σp0.2/MPa |
Elongation σ5 /% |
| 600 | 240 | 30 |
Inconel 601Standards
| Bar | Forging | Sheet/Strip | Wire | Pipe |
| ASTM B166 | ASTM B166 | ASTM B168 | ASTM B166 |
ASTM B775 ASTM B829 ASTM B167 |
Inconel 601 Application field:
1. The tray,basket and tool clamp in the heat treatment factory.
2. Steel shares at annealing and radiation control, high-speed gas burners, Industrial furnace silk screen.
3. Separate tank of ammonia reforming and catalytic support grid of nitric acid producing.
4. Exhaust system parts
5. Solid waste incinerator's combustion chamber
6. Channel support and soot dealing parts.
7. Detoxification exhaust system components
8. Oxygen re-heater
9. Form:Wire, Strip, Bar, Sheet, Pipe, etc.
