HastelloyX UNS NO6002 Nickel Alloy Steel bar Alloy Steel pipe Alloy Steel Plate
HastelloyX is main with chromium and molybdenum solid solution strengthening of a high iron content, nickel-based superalloy has good resistance and corrosion resistance, under 900 ℃ has moderate lasting and creep strength, cold and hot working good formability and weldability.Used in manufacturing of aircraft engine combustion chamber parts and other high temperature parts, use for a long time under 900 ℃, and short-term working temperature is 1080 ℃.The main products are sheet, strip, pipe, bar, forging, ring and precision casting.
Standard:
Nickel base deformation superalloy
USA: HastelloyX/UNS NO6002
Chinese brands: GH3536 / GH536 / GH22 / GH334 / GH739 / SG - 5
France: NC22FeD
German brand: NiCr22FeMo
British brand: Nimonic PE13
HastelloyX/UNS NO6002 Chemical Composition
C |
Cr | Ni | Co | W | Mo | Al | Ti | Fe | B | Cu | Mn | Si | P | S |
0.05~0.15 | 20.5~23.0 | RE | 0.50~2.50 | 0.20~1.00 | 8.0~10.0 | ≤0.50 | ≤0.15 | 17.0~20.0 | 0.010 | 0.50 | 1.00 | 1.00 | 0.025 | 0.015 |
HastelloyX sheet and pipe heat treatment system: 1130 ~ 1170 ℃, fast air cooling or water cooling;
Bar and circular pieces of test samples: 15 ℃ 1175 ℃ +, air cooling or faster cooling;
Strip: 1065 ~ 1105 ℃, fast cooling.
HastelloyX variety specifications and supply status 0.5 ~ 4.0mm plate, 0.05 ~ 0.8mm strip, 4 ~ 20mm outside diameter, wall thickness 1.0 ~ 2.0mm pipe, diameter 0.2 ~ 10.0mm welding wire, diameter 300mm rod and various diameter and wall thickness of the ring pieces and different shapes and sizes of precision casting.
Plate, strip and pipe after solid solution treatment and pickling supply, strip can also be cold rolling supply;
The welding wire can be delivered in hard state, semi-hard state, solid melting and pickling, bright and solid solution treatment state.
Bars and rings are delivered without heat treatment.
Precision casting is supplied in casting condition.
HastelloyX melting and casting process adopts arc furnace electroslag or non-vacuum induction furnace electroslag remelting process.
In the production of castings, the induction furnace remelting master alloy is used to pour the castings into the heated mold shell.
General application and special requirements of HastelloyX the alloy has been widely used in foreign aero-engines and civil industries, and is mainly used in the manufacture of combustor components and other hot end components as well as honeycomb structure in China.
The aging hardening of the alloy after long-term use at high temperature.
Type | Nickel Alloy Steel bar Alloy Steel pipe Alloy Steel Plate | ||
Manufacturing Technique | Hot rolling Hot work ,Cold rolling Cold rolling | ||
Producing Standard |
ASME B36.10 ASME B36.19 | ||
Material Grade | Nickel Alloy | ASTM B474 |
UNS N02200/Ni 200, UNS N02201 /Ni201, UNS N04400/ Monel 400, UNS N06002 /Hastelloy X, UNS N06022/ Hastelloy C22, UNS N08825/ Incoloy 825 , UNS N10276/ Hastelloy C276, UNS N10665 /Hastelloy B2, UNS N10675/Hastelloy B3, UNS N06600/Inconel 600 , UNS N06601/ Inconel 601 ,UNS N06625 /Inconel 625 , UNS N08020 /Alloy 20 |
ASTM B161 | UNS N02200/Ni 200, UNS N02201 /Ni201 | ||
ASTM B163 |
UNS N02200/Ni 200, UNS N02201 /Ni201, UNS N04400/ Monel 400, UNS N06600/Inconel 600 ,UNS N06601/ Inconel 601 |
||
ASTM B165 | UNS N04400/ Monel 400 | ||
ASTM B407 | UNS N08800 /Incoloy 800 ,UNS N08810 /Incoloy 800HT ,UNS N08811 /Incoloy 800HT | ||
ASTM B729 | UNS N08020 /Alloy 20 | ||
ASTM B444 | UNS N06625 /Inconel 625 , | ||
ASTM B423 | UNS N08825/ Incoloy 825 | ||
ASTM B464 | UNS N08020 /Alloy 20 | ||
ASTM B622 |
UNS N10665/Hastelloy B2,UNS N10675/Hastelloy B3, UNS N06200/C2000,UNS N10276 /C276, UNS N06002 Hastelloy-X,UNS N08031/Alloy 31 |
||
Duplex Steel | ASTM A789 | S31803,S32205,S32750, S32760 | |
ASTM A790 | S31803,S32205,S32750, S32760 | ||
Stainless Steel | ASTM A312 |
TP304,TP304L,TP316,TP316L,316Ti TP317,TP317L, TP321,TP310S,TP347,S31254,N08367,NO8926,NO8904 |
|
ASTM A213 |
TP304,TP304L,TP316,TP316L,316Ti TP317,TP317L, TP321,TP310S,TP347,S31254,N08367,NO8926,NO8904 |
||
ASTM A269 |
TP304,TP304L,TP316,TP316L,TP317,TP317L,TP321, TP347,S31254,NO8367,NO8926 |
||
ASTM B676 | N08367 | ||
ASTM B677 | UNS N08925, UNS N08926 | ||
Alloy Steel | ASTM A333 | Grade 3, Grade 6,Grade 8,Grade 9 | |
ASTM A335 | P5,P9,P11,P12,P22,P91,P92 | ||
Carbon Steel | ASTM A106 /A53 | GR.B | |
API 5L | GR.B ,X42 ,X46 ,X52 ,X56 ,X60 ,X65 ,X70 PSL1 PSL2 |
Heat treatment
Recommend solid solution treatment temperature of 1149 ℃ ~ 1177 ℃.
(1149 ℃ ~ 1177 ℃ for SAE AMS5536 specified in the solid solution treatment temperature.)
In order to inhibit the formation of precipitates, quenching must be carried out after heat treatment.
Plastic workability
Recommend hot working temperature range is 982 ~ 1177 ℃.
Cold working is easy.
Compared with standard austenitic stainless steel, however, more force is required during machining.
Regardless of any process, in order to obtain good creep performance, after processing must be first solid solution treatment before use.
weldability
Good weldability, same as standard austenitic stainless steel, can be TIG welding, MIG welding and manual arc welding.
use Combustion cylinders of gas turbines, cone tubes of reburners and various other components, fans of heating furnaces, rotating cylinders, pallets, metal parts and various other components, etc.
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000, 8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |