|
Product Details:
Payment & Shipping Terms:
|
| Product: | 304, 316L, 321, 310S Stainless Steel Tube | Standard: | ASTM, AISI, GB, JIS |
|---|---|---|---|
| Grade: | 200/300/400/900 Series | Surface: | Pickled And Bright Polished Finish |
| Technique: | Cold Rolled Hot Rolled | Type: | Seamless Welded |
| Shape: | Round. Square.Rectangle | Thickness: | 1mm ~ 15mm |
| OD: | 6mm ~ 1175mm | Length: | Customer's Requirement |
| High Light: | 1mm 304 stainless tubing,JIS Seamless 304 stainless tubing,310S stainless steel welded tube |
||
China stainless steel pipe manufacturers 304, 316L, 321, 310S stainless steel tube
HAOSTEEL is one of the most professional manufacturer and supplier of stainless steel Tube.Stainless steel tube can be divided into seamless tube and welded tube according to production mode. Seamless tube can be divided into hot rolled tube, cold rolled tube, cold drawn pipe and extruded tube.The welded pipe is divided into straight welded pipe and spiral welded tube.
Description:
According to the metallographic structure of stainless steel, the seamless tubes of semi-ferritic semi-martensitic stainless steel, martensitic stainless steel, austenitic stainless steel and austenitic ferritic stainless steel are divided.
Specification and appearance quality:
A. According to gb14975-2002 "seamless steel pipe of stainless steel", the normal length of steel pipe (indefinite ruler) is 1.5-10m. The hot-rolled steel pipe is equal to and greater than 1m.Cold drawn (rolled) steel pipe wall thickness of 0.5~1.0mm, 1.0~7m;Wall thickness greater than 1.0mm, 1.5-8m.
B. 45 types of hot-rolled (hot-extruded) steel tubes with a diameter of 54~480mm;Wall thickness: 4.5-45mm, total 36 kinds.There are 65 kinds of cold drawn (rolled) steel tubes with diameter of 6~200mm.There are 39 kinds of wall thickness ranging from 0.5 to 21mm.
C. There shall be no cracks, folds, cracks, cracks, rolled folds, dissociation and scarring defects on the inner and outer surface of the steel pipe. These defects shall be completely cleared (except for the pipe used for machining).Other minor surface defects not exceeding the allowable negative deviation may not be removed.
D. the straight path allows depth.Hot-rolled and hot-extruded steel tubes with diameters of less than and equal to 140mm shall not be greater than 5% of the nominal wall thickness and the maximum depth shall not be greater than 0.5mm.Cold drawn (rolled) steel tube shall not be greater than 4% of nominal wall thickness and the maximum depth shall not be greater than 0.3mm.
E. Both ends of the steel tube shall be cut at right angles, and the burr shall be removed.
Specification:
|
Product show
Chemical Composition about stainless steel Tube
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤0.03 | 3.5-5.5 | 16.0-18.0 | - |
| 202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | ≤0.03 | 4.-6.0 | 17.0-19.0 | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 8.0-10.0 | 17.0-19.0 | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 8.0-10.5 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤0.03 | 19.0-22.0 | 24.0-26.0 | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 17.0-19.0 | - |
| 630 | ≤0.07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 3.0-5.0 | 15.5-17.5 | - |
| 631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
| 904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
| 2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
| 2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤0.03 | 0.19-0.22 | 0.24-0.26 | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | - | 11.5-13.5 | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.03 | ≤0.60 | 16.0-18.0 | - |
Stainless steels of various kinds are used in thousands of applications.
1. Domestic - cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades
2. Transport a exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles
3. Oil and Gas - platform accommodation, cable trays, subsea pipelines.
4. Medical Surgical instruments, surgical implants, MRI scanners.
5. Food and Drink - Catering equipment, brewing, disilling, food processing
6. Water - Water and sewage treatment, water tubing, hot water tanks.
Contact Person: Haosteel
Tel: +8615214384812
